3D Printed Wickham trolley - railway engineering personnel carrier
The Wickham trolley was a railway engineering personnel carrier, to run on standard gauge and narrow gauge(often the same ones) .
This is a typical standard length version and a double ended version, based on one supplied to MOD, but could make a small railcar,
narrow or standard gauge.
Requires chassis and finishing
Versions with and without roof, so can be modeled open, or with a lightweight roof
 |
Description | Model Scales |
| Click on Red Triangles for link to specific scale item on Shapeways | ||
 |
This is a typical standard length version with
roof
requires chassis |
|
 |
This is a typical standard length version
without roof
requires chassis |
|
 |
This is a double ended version with roof
requires chassis |
|
 |
This is a double ended version
without roof
requires chassis |
|
 |
This is a standard single length unit, which is
fully open
requires chassis |
|
Pictures are just for reference, not of specific scaled model.
All 3D printed designs by Simon Dawson (Rue d'Étropal) , currently produced to order by Shapeways. Just follow links to Shapeways pages.
===============================
Link to:
3D printed standard gauge locomotives
3D printed standard gauge rolling stock
3D printed standard gauge railcars-ex SR
3D printed standard gauge railcars - ex GWR
3D printed standard gauge railcars - ex LNER
3D printed standard gauge railcars - ex LMS
3D printed standard gauge railcars/trams - LT
3D printed narrow gauge locomotives
3D printed narrow gauge rolling stock
3D printed track and accessories
>>>>>>>>>>>>>>>>>>>>>> back to 3D Printing Menu
======================================
Direct links to lists for each scale below
 |
 |
 |
 |
 |
|
 locomotives |
rolling
stock |
|
|
 |
 |
 |
 |
 |
 |
====================================================
Currently adding links to all my designs, all other designs please go to my Shapeways e-shop.