Suitable for narrow gauge on 16.5mm gauge, such as O16.5, On30 or 1/32n2 or 1/35n2
Representing small well type turntables. No need to cut hole in baseboard. Turn 180 degrees using control wires. Can use turntable tops from wagon turntables.
These track panels are designed to fit Peco code 100 rail.
recommended for indoor use only, as plastic is not fully water proof
Link to
16.5 and 9mm mixed gauge track
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> back to Track Menu page
 |
Description | Template |
|
|
165-small-turntable-84d-flat Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely. This version is flat topped 84mm diameter 16.5mm gauge . Fit code 100 rail alternative version with just deck included mechanism included for remote operation wiring would still need to be determined
|
Print off template |
|
|
165-small-turntable-84d-wood Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely. alternative version with just deck included mechanism included for remote operation wiring would still need to be determined . |
Print off template |
|
|
165-small-turntable-168d-large-wood Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely. alternative version with just deck included mechanism included for remote operation wiring would still need to be determined
|
Print off template |
|
|
165-small-turntable-168d-wood Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely. This version is wood topped 168mm diameter 16.5mm gauge . Fit code 100 rail alternative version with just deck included mechanism included for remote operation wiring would still need to be determined
|
Print off template |
|
|
165-small-turntable-168d-flat Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely. This version is wood topped 168mm diameter 16.5mm gauge . Fit code 100 rail alternative version with just deck included mechanism included for remote operation wiring would still need to be determined
|
Print off template |
